篇五：委托加工合同范本_OEM合同(上)
委托加工合同范本_OEM合同（上）
委 托 方：____________________________________
地 址：____________ 邮码：____________ 电话：____________
法定代表人：____________ 职务：____________
定 做 方：____________________________________
地 址：____________ 邮码：____________ 电话：____________
法定代表人：____________ 职务：____________
定做方委托委托方加工____________，经双方充分协商，特订立本合同，以便共同遵守。
第一条 加工成品
编号
名称
规格
单位
数量
备注
Commission processing contract template _OEM contract (on)
Principal :____________________________________
Address :____________ Postal Code :____________ Phone :____________
The legal representative of the :____________ duties :____________
Custom side :____________________________________
Address :____________ Postal Code :____________ Phone :____________
The legal representative of the :____________ duties :____________
Commissioned by the commissioning party custom party processing ____________, full consultation by both parties, special to make this contract in order to abide by.
The first finished products
Number
Name
Specification
Unit
Quantity
Remarks
第二条 加工成品质量要求
第三条 原材料的提供办法及规格、数量、质量
The second quality finished products
Article provided by way of raw materials and specifications, quantity, quality
1.(用委托方原料完成工作的)，委托方必须依照合同规定选用原材料，并接受定做方检验。委托方隐瞒原材料的缺陷或者用不符合合同规定的原材料而影响定做质量时，定做方有权要求重作、修理、减少价款或退货。(质量保证的问题)
1 (Principal raw materials used to complete the work), the client must use raw materials in accordance with the provisions of the contract, and accept custom-square test. The commissioning party to conceal material defects or nonconforming use of raw materials affect the quality of custom, the custom-made party the right to request to redo, repair, reduce the price or return. (Quality assurance issues)
2.(用定做方原材料完成工作的，应当明确规定原材料的消耗定额)。定做方应按合同规定的时间、数量、质量、规格提供原材料，委托方对定做方提供的原材料要按合同规定及时检验，不符合要求的，应立即通知定做方调换或补齐。委托方对定做方提供的原材料不得擅自更换，对修理的物品不得偷换零部件。
2 (square of raw materials with custom work done, it should be clear that the consumption of raw materials, fixed). Custom party should be stipulated in the contract time, quantity, quality, specifications of raw materials, the commissioning party provided the raw material for custom-made according to the contract and timely inspection, does not meet the requirements, custom-made party shall immediately notify the exchange or padded.
Principal of the raw materials provided by custom are not allowed to replace, repair items are not allowed for substitution of parts.
3.交(提)原材料等物品日期计算，参照第七条规定执行。
第四条 技术资料、图纸提供办法
3 cross (to mention) the date of the calculation of raw materials and other items, refer to Article VII implementation.
Article technical information, drawings supplied by way
1.委托方在依照定做方的要求进行工作期间，发现提供的图纸或技术要求不合理，应当及时通知定做方；定做方应当在规定的时间内回复，提出修改意见。委托方在规定的时间内未得到答复，有权停止工作，并及时通知定做方，因此造成的损失，由定做方赔偿。
2.委托方对于委托的工作，如果定做方要求保密，应当严格遵守，未经定做方许可不得留存技术资料的复制品。
3.定做方应当按规定日期提供技术资料、图纸等。
1 Principal parties in accordance with the requirements of custom work, found the
drawings or technical demands are unreasonable, it shall promptly notify the custom side; custom party shall reply within the prescribed time, propose amendments. Principal within
the prescribed time has not been answered, the right to stop work and notify the custom side, the resulting loss, damages by the custom side.
2 Principal for commissioned work, custom side if requested confidentiality, should be strictly adhered to, permission shall not be retained without the custom side of copies of technical information.
3 custom-made party date should be required to provide technical information, drawings and so on.
第五条 价款或酬金
价款或酬金，按照国家或主管部门的规定执行，没有规定的由当事人双方商定。
第六条 验收标准和方法
1.按照合同规定的质量要求、图纸和样品作为验收标准。
2.定做方应当按合同规定的期限验收委托方所完成的工作。验收前委托方应当向定做方提交必需的技术资料和有关质量证明。对短期检验难以发现质量缺陷的定做物或项目，应当由双方协商，在合同中规定保证期限。保证期限内发生问题，除定做方使用、保管不当等原因而造成质量问题的以外，由委托方负责修复或退换。
3.当事人双方对委托的定做物和项目质量在检验中发生争议时，可由法定质量监督检验机构提供检验证明。
Article price or remuneration
Price or remuneration, in accordance with national regulations or the competent department, does not require the two sides agreed to by the parties.
Article acceptance criteria and methods
1 according to the contract quality requirements, drawings and samples as acceptance criteria.
2 custom-made party shall limit stipulated in the contract acceptance of the work done by the commissioning party. Acceptance before the commissioning party shall be required to
submit a custom technical information and evidence about the quality. Difficult to find
quality short-term test for defects in materials or items made to order, should be by mutual agreement, the provisions in the contract guarantee period. Problem within the warranty period, in addition to custom-made party to use, improper storage and other quality problems caused by reasons other than by the commissioning party is responsible for repair or exchange.
3. Both parties to the commission of custom objects and project quality in the event of a dispute inspection, quality supervision and inspection by the statutory body to provide inspection certificate
第七条 交货的时间和地点
1.交(提)定做物期限应当按照合同规定履行。任何一方要求提前或延期交(提)定做物，应当在事先与对方达成协议，并按协议执行。
2.交(提)定做物日期计算：委托方自备运输工具送交定做物的以定做方接收的戳记日期为准；委托运输部门运输的，以发运定做物时承运部门签发戳记日期为准；自提定做物的，以委托方通知的提取日期为准，但委托方在发出提取定做物通知中，必须留给定做方以必要的途中时间；双方另有约定的，按约定的方法计算。
Article delivery time and location
1 pay (mentioned) should be made to order things according to the contract performance period. Any party required to pay in advance or postpone (put) custom objects, should be agreed in advance with each other, according to protocol implementation.
2 cross (to mention) the date of calculation of custom objects: self-transport sent to the commissioning party custom objects to customize the stamp date of the reception;
commissioned by the transport sector transport, custom shipping materials to be issued when the carrier sector stamp date of; from mentioning custom objects to the
commissioning party to inform the date of extraction, but the commissioning party in a notice issued by extracting custom objects, custom side must be left on the way to the necessary time; otherwise agreed , according to the agreed method.
【精选关于oem加工协议书】相关文章：
1.OEM合作协议书
5.加工协议书
6.配件加工协议书
7.加工与安装协议书
8.配件加工协议书
本文来源：http://www.010zaixian.com/shiyongwen/2577440.htm